Convert megapascals to torr

1 MPa=7,500.62Torr

Use the converter below to change any megapascals value into torr instantly — with formula, conversion table, and real-world examples.

You have

Equals

7,500.62

Conversion formula

Forward

torr = megapascals × 7,500.62

Reverse

megapascals = torr × 0.0001333

Example: 10 MPa × 7,500.62 = 75,006.17 Torr.

About both units

From

Megapascal

MPa

The megapascal equals 1,000,000 pascals or 10 bar. Used for high-pressure engineering — hydraulic systems, material strength, concrete compression tests. 1 MPa is roughly the pressure of a 100-tonne weight on 1 m².

Real-world: Concrete compressive strength: 20–60 MPa. Hydraulic press: 30–70 MPa. Steel yield strength: 250+ MPa.

Read full megapascal reference →

Torr

The torr equals 1/760 atm — approximately 133.32 Pa. Essentially equivalent to mmHg but defined slightly differently. Used in vacuum-system engineering and older physics.

Real-world: Low-vacuum: 760 to 25 torr. High-vacuum: 10⁻³ to 10⁻⁹ torr. Semiconductor fabrication: often below 10⁻⁶ torr.

Read full torr reference →

Megapascal to Torr conversion table

Common megapascals to torr values for quick reference.

Megapascal (MPa)	Torr (Torr)
1 MPa	7,500.62 Torr
5 MPa	37,503.08 Torr
10 MPa	75,006.17 Torr
25 MPa	187,515.42 Torr
50 MPa	375,030.84 Torr
100 MPa	750,061.68 Torr
200 MPa	1,500,123.37 Torr
500 MPa	3,750,308.41 Torr
1,000 MPa	7,500,616.83 Torr
5,000 MPa	37,503,084.14 Torr

Tips & common mistakes

Quick tips

1 MPa = 10 bar = 145 psi.
N/mm² = MPa (same unit, different notation).
Use MPa for material science; bar for fluid dynamics.

Avoid these

Confusing MPa with MW or MJ.
Using 1 MPa = 100 bar — that's incorrect; it's 10 bar.
Mixing MPa and kPa without conversion in mixed docs.

Frequently asked questions

How many torr in a megapascal?

One megapascal equals 7,500.62 torr.

How do I convert megapascals to torr?

Multiply the megapascal value by 7,500.62 to get the equivalent in torr.

What is 100 megapascals in torr?

100 megapascals equals 750,061.68 torr.

Is a megapascal bigger than a torr?

Yes. 1 megapascal equals 7,500.62 torr, so one megapascal is larger.

How to convert megapascals to torr without a calculator?

Multiply by 7,500.62 for a quick estimate; use a calculator for precise results.

Related pressure conversions

📊 See full comparison matrix →

Conversions in other categories

WeightKilogram → Pound LengthKilometer → Mile TemperatureCelsius → Fahrenheit VolumeLiter → US Gallon AreaSquare Meter → Square Foot SpeedKilometer per Hour → Mile per Hour EnergyKilojoule → Kilocalorie PowerKilowatt → Mechanical Horsepower